ClearTrace In-Line Turbidity Meter

More for your money...today and tomorrow! AV38 Local Display Provides local interface with a 16 character, 2 line display and 7 key navigation. Data reporting with up to 2 current loops. 2 Form C relays. Digital communications. Turbidity Sample Chamber The turbidity sample chamber is specifically designed to prepare water for turbidity measurements and removes bubbles from the water so that solid particles can be accurately detected. Lamp and Chamber Lid The chamber lid houses a collimated white light to illuminate particles suspended in the water. Inside Sample Chamber The inside sample chamber volume is designed to hold only 135 milliliters, therefore, it takes a very small amount of standard to perform USEPA mandated calibrations. ComStick Provides universal conversion of sensor signals and interactive communications for measurement, calibration, configuration and diagnostics. Meter Code Description 5-0113 ClearTrace In-Line Turbidity Meter Calibration Kits (Should be ordered with initial system) 5-0114 Turbidity Calibration Kit 2020CT liter (0 NTU & 20 NTU, foam brushes & rinse bottles) 5-0115 Turbidity Calibration Kit 2020CT gallon (0 NTU & 20 NTU, foam brushes & rinse bottles) Measurement System Performance Range: 0 to 100 NTU Resolution: 0.001 NTU Accuracy: ±2% of reading or ±0.015 NTU whichever is greater. ±5% of reading above 40 NTU Step Response Time: 90% in 120 seconds NOTE: typical at 25°C. Performance unaffected by cable length Units of Measure Measurement Units: NTU Temperature Units: °C, °F Calibration Sample: 1 point Zero: 1 point Temperature: 1 and 2 point Note: Turbidity and temperature are precalibrated at the factory Operational Environment Water Temperature Range: -5°C to 50°C Air Temperature Range: -20°C to 60°C Maximum Flow Rate: 500 mL/min (7.9 gal/hr) Minimum Flow Rate: 250 mL/min (4 gal/hr) Interface Display: 2 lines, 16 characters, 7 key navigation Current Loops: 1 loop standard, 2nd loop optional Relays: 1 or 2 optional (Form C) Power Requirements Voltage Range: 24 VDC Maximum Power: 8W with AV38, ComStick & light source Typical Power: 6W with AV38, ComStick & light source Note: Class II DC power supply required Construction Light Source: White light (Tungsten) Sample Chamber Material: ABS plastic Sample Chamber Volume: 135 mL Light Source Housing: Anodized Aluminum Mounting Plate: 12 x 12 inches, 4 mounting holes Sensor Head Material: Quartz Glass, Anodized Aluminum Weight: 5.6 lbs Other Configuration Options Sensor Filter: 0 to 100 seconds Temperature Filter: 0 to 100 seconds Approval & Ratings Immunity & Emissions: CE (EN61326 and EN61326:1998) Safety: CE (EN 61010-1), UL 508 Hazardous Locations: UL Class I, Division 2 Standards Code Description 5-0016 Turbidity Standard 0.0 NTU 2020CT 1 liter 5-0017 Turbidity Standard 0.0 NTU 2020CT 1 gallon 5-0018 Turbidity Standard 1.0 NTU 2020CT 1 liter 5-0019 Turbidity Standard 1.0 NTU 2020CT 1 gallon 5-0020 Turbidity Standard 10.0 NTU 2020CT 1 liter 5-0021 Turbidity Standard 10.0 NTU 2020CT 1 gallon 5-0022 Turbidity Standard 20.0 NTU 2020CT 1 liter 5-0023 Turbidity Standard 20.0 NTU 2020CT 1 gallon Replacement Parts Code Description 5-0124 Bulb and cable assembly 2020CT 5-0125 Sample chamber lid without lamp 2020CT 5-0126 Replacement sample chamber 2020CT 5-0127 ComStick 2020CT 5-0128 Turbidity Probe 2020CT Order Direct: Phone: 800-344-3100 410-778-3100 Fax: 410-778-6394 Mail: LaMotte Company PO Box 329 Chestertown, MD 21620