Aquariums Archives - Page 16 of 17

The Insta-Test Ammonia test strips provide a fast and easy method for testing ammonia levels in fresh or salt water. Range/sensitivity is 0, 0.5, 1.0, 3.0, 6.0 (ppm) NH₃.

This kit tests for Wide Range pH using the Octa-Slide 2 Comparator. Range and sensitivity is 5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 9.0, 10.0 pH

The electronic Salt TRACER PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F.

Easy to use
2% accuracy for EC, TDS, and Salt modules
Automatic temperature compensation
Self calibration
Memory can store up to 25 readings; autopower off after 10 minutes of no button presses
Automatic shut-off and low battery indicator; uses four 3V CR-2032 button batteries

This kit can be used for testing pH levels in salt water using the Octa-Slide 2 Comparator. Range and sensitivity is 7.7, 7.8, 7.9, 8.0, 8.1, 8.2, 8.3, 8.4 pH.

Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.

Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
Memory stores up to 25 labeled readings; auto power off and low battery indicator
Adjustable Conductivity to TDS ratio

This LaMotte Phosphate test kit tests for low range Phosphate using the LRC Comparator. Range and sensitivity is 0, 0.2, 0.4, 0.6, 0.8, 1.0, 1.5, 2.0 ppm PO₄^3–.

The electronic pH TRACER PockeTester™ allows direct reading of pH from 0.01 to 14.00 pH. The TRACER offers simultaneous pH and Temperature displays and a 15-reading memory storage. pH range is 0.00 to 14.00 pH/0.01 pH. Temperature range is 23° to 194°F (5° to 90° C).

This Salinity kit test for salinity using the Direct Reading Titrator method. Range and sensitivity is 0-40 ppt/0.4 ppt Salinity.

This Alkalinity test kit provides total alkalinity readings only, using a Direct Reading Titrator. Testing range/sensitivity 0-200 ppm/4 ppm as CaCO₃.

A complete outfit for pond fish culture, ideal for fresh water analysis. Nine critical test factors can be efficiently and accurately determined on-site. Designed with field analysis as a priority; all reagents, components and accessories are arranged in pre-drilled ethafoam. Short form instructions are provided in a handy lid label for easy access. Long form instruction booklet provides detailed instructions and test kit diagram. Unit is supplied complete with labware, accessories, sampling bottle, and reagents for 50 tests of each factor.