Standardized pH buffer solutions are used for the calibration of pH meters.

 

Minute amount of color permits immediate visual distinction of different buffer values.

 

Minute amount of color permits immediate visual distinction of different buffer values.

 

These Potassium Chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.

Conductivity TDS Standard Size Options

Item Description Order Code
Conductivity TDS Standard, 6668 μS/cm 4668 ppm, 100mL 6418-J
Conductivity TDS Standard, 6668 μS/cm 4668 ppm, 500mL 6418-L

 

These Potassium Chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.

Conductivity TDS Standard Size Options

Item Description Order Code
Conductivity TDS Standard, 718 μS/cm 503 ppm, 100mL 6417-J
Conductivity TDS Standard, 718 μS/cm 503 ppm, 500mL 6417-L
Conductivity TDS Standard, 718 μS/cm 503 ppm, 3800mL 6417-N

 

The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA.

Features

 

LaMotte introduces the BrewLab® Pro water analysis kit. Designed with the professional brewer in mind, this kit measures 11 test factors which are important in the brewing process. Water is the most important ingredient for any brewer. The BrewLab® Pro helps you to make your best craft brew and reproduce your results time and time again!

Test for 11 Essential Factors

 

Test for 7 Essential Factors

 

Insta-TEST® QAC strip is a convenient way to test for QAC levels in sanitized water. Range and sensitivity is 0, 100, 200, 300, 400, 500 ppm, and has 100 test strips per vial.

 

The DPD-FAS titration test kit measures Free and Total Chlorine in 0.2 ppm and 0.5 ppm increments. The distinct color change allows for accurate readings even at very low or high chlorine levels. The DipCell Color Comparator displays pH levels from 6.8 to 8.2 for 50 tests. The pH test is measured using liquid reagents.