Food, Beverage & Brewing Archives - Page 36 of 43

A kit from Solvay for the determination of for the determination of tetrakishydroxymethyl phosphonium sulfate (THPS). The iodometric titration may be used for fresh or salt water in oilfields, towers, pulp and paper, etc.

A simple color chart kit for measuring Copper from 0.05 to 1.0 ppm. Eight color standards are provided on the chart. Economical and easy-to-use.

This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.

This kit tests for nitrite using the direct reading titrator method. Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂.

Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
Adjustable Salinity Compensation from 0 to 50 ppt
Memory stores up to 25 data sets with DO and Temperature reading
Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
Optional 3 ft (1m) or 16 ft (5m) extension cable
Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48″ (1.2m) neckstrap

The Insta-TEST^® Low Range Hydrogen Peroxide Test Strips is a convenient way to quickly measure peroxide levels in water with fast dip and read results. Range and sensitivity is 0, 1, 3, 10, 30, 50 ppm.

This kit tests for Turbidity using the drop count method. Range and sensitivity is 5-100 JTU/5 JTU, 10-200 JTU/10 JTU.

The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.

This kit tests for Calcium Hardness in fresh or salt water. Includes inhibitors to eliminate metal interference’s. All results are as CaCO₃. Range/sensitivity is 0-200 ppm/4 ppm CaCO₃, 0-2,500 ppm by dilution.

This kit tests for nitrite using the dropper pipet method. Range/sensitivity is 1 drop = 50 or 100 ppm NaNO₂.