Food, Beverage & Brewing Archives - Page 41 of 43

This kit tests for Tannin/Lignin using the Octa-Slide 2 Comparator. Range and sensitivity is 1, 2, 3, 4, 5, 6, 8, 10 ppm Tannin or lignin like substances.

Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.

Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
Memory stores up to 25 labeled readings; auto power off and low battery indicator
Adjustable Conductivity to TDS ratio

This kit is used for testing for Free Available Chlorine, Monochloramine, Dichloramine, Total Residual Chlorine, and pH using DPD Tablets, Phenol Red Tables and the Octa-Slide 2 Comparator. Range and sensitivity is Low: 0.1-1.0 ppm Cl, High: 1.0-6.0 ppm Cl, pH: 6.8-8.2. Includes Chemistry & Control of Modern Chlorination Handbook now available as a download.

This kit tests for Nitrate-Nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO₃-N.

Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
Readings are not affected by sample color or turbidity
Automatic self calibration
Extra bold display includes an analog bar graph feature
Memory can store up to 15 readings
Chlorine and pH modes also display sample temperature
Meter identifies which probe is in use and retains calibrations
Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
Follows EPA protocol for ISE methods

2951HR High Range QAC test papers are specifically formulated to read high range levels of QAC. Range and sensitivity is 200, 400, 600, 1000, 1500 ppm.

A kit from Solvay for the determination of for the determination of tetrakishydroxymethyl phosphonium sulfate (THPS). The iodometric titration may be used for fresh or salt water in oilfields, towers, pulp and paper, etc.

A simple color chart kit for measuring Copper from 0.05 to 1.0 ppm. Eight color standards are provided on the chart. Economical and easy-to-use.

This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.

This kit tests for nitrite using the direct reading titrator method. Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂.