Laundry & Sanitation Archives - Page 34 of 41

This kit is used for testing for Free Available Chlorine, Monochloramine, Dichloramine, Total Residual Chlorine, and pH using DPD Tablets, Phenol Red Tables and the Octa-Slide 2 Comparator. Range and sensitivity is Low: 0.1-1.0 ppm Cl, High: 1.0-6.0 ppm Cl, pH: 6.8-8.2. Includes Chemistry & Control of Modern Chlorination Handbook now available as a download.

This kit tests for Nitrate-Nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO₃-N.

Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
Adjustable Salinity Compensation from 0 to 50 ppt
Memory stores up to 25 data sets with DO and Temperature reading
Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
Optional 3 ft (1m) or 16 ft (5m) extension cable
Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48″ (1.2m) neckstrap

This kit tests for QAC using the Direct Reading Titrator method. Range and sensitivity is 0-1,000 ppm/20 ppm, 0-5,000 ppm/100 ppm with dilution.

A masked bromphenol blue indicator is added to the sample and turns green. Sodium tetraphenylboron is added to complex the QAC and the color changes to red. This method is best suited to higher QAC concentrations.

Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.

Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
Memory stores up to 25 labeled readings; auto power off and low battery indicator
Adjustable Conductivity to TDS ratio

This test kit measures for Chlorine Bleach using the Direct Reading Titrator method. Range/sensitivity is 00-10%/0.2% Cl.

This kit tests for nitrite using the direct reading titrator method. Range/sensitivity is 0-1000 ppm/20 ppm NaNO₂.

The Insta-TEST^® Low Range Chlorine test strips are a convenient way to test low range levels of Free Chlorine. Ideal for drinking water or pools. Range and sensitivity is 0, 0.5, 1, 3, 5, 10 ppm.

This kit tests for Silica using the Octa-Slide 2 Comparator. Range and sensitivity is 0.5, 1.0, 2.0, 3.0, 4.0, 6.0, 8.0, 10.0 ppm or 5, 10, 20, 30, 40, 60, 80, 100 ppm SiO₂.

The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.