Laundry & Sanitation Archives - Page 39 of 40

This kit tests for nitrate or nitrite using the Octa-Slide 2 Comparator. Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm NO₃-N.

Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
Readings are not affected by sample color or turbidity
Automatic self calibration
Extra bold display includes an analog bar graph feature
Memory can store up to 15 readings
Chlorine and pH modes also display sample temperature
Meter identifies which probe is in use and retains calibrations
Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
Follows EPA protocol for ISE methods

This kit tests for QAC using the Direct Reading Titrator method. Range and sensitivity is 0-500 ppm/10 ppm Alkyl dimethyl benzyl ammonium chloride.

A masked bromphenol blue indicator is added to the sample and turns green. Sodium tetraphenylboron is added to complex the QAC and the color changes to red. This method is best suited to higher QAC concentrations.

The following potassium chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.

The electronic Salt TRACER PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F.

Easy to use
2% accuracy for EC, TDS, and Salt modules
Automatic temperature compensation
Self calibration
Memory can store up to 25 readings; autopower off after 10 minutes of no button presses
Automatic shut-off and low battery indicator; uses four 3V CR-2032 button batteries

This kit is used for testing for Free Available Chlorine, Monochloramine, Dichloramine, Total Residual Chlorine, and pH using DPD Tablets, Phenol Red Tables and the Octa-Slide 2 Comparator. Range and sensitivity is Low: 0.1-1.0 ppm Cl, High: 1.0-6.0 ppm Cl, pH: 6.8-8.2. Includes Chemistry & Control of Modern Chlorination Handbook now available as a download.

This kit tests for Nitrate-Nitrogen using tablet reagents and the Octa-Slide 2 Comparator. Range/sensitivity is 0, 1, 2, 4, 6, 8, 10, 15 ppm NO₃-N.

Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
Adjustable Salinity Compensation from 0 to 50 ppt
Memory stores up to 25 data sets with DO and Temperature reading
Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
Optional 3 ft (1m) or 16 ft (5m) extension cable
Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48″ (1.2m) neckstrap

This kit tests for QAC using the Direct Reading Titrator method. Range and sensitivity is 0-1,000 ppm/20 ppm, 0-5,000 ppm/100 ppm with dilution.

Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.

Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
Memory stores up to 25 labeled readings; auto power off and low battery indicator
Adjustable Conductivity to TDS ratio