Pools, Spas & Aquatics Archives - Page 28 of 29

Measures the Borate levels from 0, 15, 30, 50, 80 ppm in 15 seconds. Each bottle includes 25 test strips packaged in a waterproof PopTop bottle with a molded desiccant liner, which protects the strips from moisture and UV light. This product includes trilingual (English, Spanish, French) instructions.

The electronic Salt TRACER PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F.

Easy to use
2% accuracy for EC, TDS, and Salt modules
Automatic temperature compensation
Self calibration
Memory can store up to 25 readings; autopower off after 10 minutes of no button presses
Automatic shut-off and low battery indicator; uses four 3V CR-2032 button batteries

This kit tests for Low Iron in water using Iron Reagents and the LRC Comparator. Range/Sensitivity is 0.05, 0.10, 0.20, 0.30, 0.40, 0.60, 0.80, 1.0 ppm Fe.

The Copper formula designed for stable color development allows adequate time for the user to match very distinct colors. Copper strip measures the total Copper levels from 0-3.0 ppm. The bottle label has multilingual instructions in English, Spanish and French. Packaged 25 strips per bottle.

Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.

Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
Memory stores up to 25 labeled readings; auto power off and low battery indicator
Adjustable Conductivity to TDS ratio

Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
Readings are not affected by sample color or turbidity
Automatic self calibration
Extra bold display includes an analog bar graph feature
Memory can store up to 15 readings
Chlorine and pH modes also display sample temperature
Meter identifies which probe is in use and retains calibrations
Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
Follows EPA protocol for ISE methods

Insta-TEST^® Copper, pH, and Alkalinity Test Strips measures Copper 0, 0.3, 0.6, 1, 3 ppm, pH 6.2, 6.8, 7.2, 7.6, 8.0, 8.4, and Alkalinity 0, 40, 80, 120, 180, 240 ppm in 10 seconds. There are 25 strips per bottle and packaged in a unique, hinged, waterproof PopTop bottle with desiccant liner that protects the test strips from moisture intrusion.

The electronic pH TRACER PockeTester™ allows direct reading of pH from 0.01 to 14.00 pH. The TRACER offers simultaneous pH and Temperature displays and a 15-reading memory storage. pH range is 0.00 to 14.00 pH/0.01 pH. Temperature range is 23° to 194°F (5° to 90° C).

The test is based on the reaction of the cationic polyquat with an anionic polyelectrolyte using Toluidine Blue O as the indicator. The color change is blue to purple. Levels are determined using the drop count method. Range and Sensitivity is 1 drop = 1 ppm Polyquat.

The Insta-TEST^® Copper & Iron Test Strip Kit measures Copper levels from 0-3.0 ppm and Iron levels from 0-5.0 ppm. The Copper test strip has been improved with a one-dip formula that offers very distinct colors. The one-dip Insta-TEST^® Iron test strip formula eliminates the need to pre-treat the sample with a reduction tablet prior to measuring Iron with a test strip. The Iron strip makes the testing process simpler with just one dip of the strip into a pool or spa before matching the reaction to a color chart on the bottle. There are 25 strips packaged per bottle.