This kit tests for Tannin/Lignin using the Octa-Slide 2 Comparator. Range and sensitivity is 1, 2, 3, 4, 5, 6, 8, 10 ppm Tannin or lignin like substances.
Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.
Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
Memory stores up to 25 labeled readings; auto power off and low battery indicator
Adjustable Conductivity to TDS ratio
Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
Readings are not affected by sample color or turbidity
Automatic self calibration
Extra bold display includes an analog bar graph feature
Memory can store up to 15 readings
Chlorine and pH modes also display sample temperature
Meter identifies which probe is in use and retains calibrations
Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
Follows EPA protocol for ISE methods
An 8″ resin column (10.25″ total height) that softens up to 70 gallons of medium hard water (7 gpg hardness) before requiring regeneration or fresh resin. Model S softener is furnished in the Model AT-38 and AT-Q-38 outfits.
The electronic pH TRACER PockeTester™ allows direct reading of pH from 0.01 to 14.00 pH. The TRACER offers simultaneous pH and Temperature displays and a 15-reading memory storage. pH range is 0.00 to 14.00 pH/0.01 pH. Temperature range is 23° to 194°F (5° to 90° C).
Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
Adjustable Salinity Compensation from 0 to 50 ppt
Memory stores up to 25 data sets with DO and Temperature reading
Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
Optional 3 ft (1m) or 16 ft (5m) extension cable
Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48″ (1.2m) neckstrap
The new LaMotte twin-chambered softener clearly demonstrates the advantages of advanced two-part treatment systems. Customize one today to demonstrate the true effectiveness of your treatment system. Also available: Order Code 1022 DuoSoft unit empty to fill with your choice of media.
Treat tap water in one pass with a two chambered softener
Filter screen divider prevents bleeding of media between beds
Two 4½ columns (10.25½ total height)
A filled Duo-Soft is furnished in the Model AT-40 and AT-Q-40 outfit
The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.
The Insta-TEST® Low Range Chlorine test strips are a convenient way to test low range levels of Free Chlorine. Ideal for drinking water or pools. Range and sensitivity is 0, 0.5, 1, 3, 5, 10 ppm.
The Model AR-42 has the same test range for pH, Hardness, and Iron as the AR-02, but it also is equipped to test for Sulfide (0.2-20 ppm). Includes 50 tests for pH, Hardness, and Sulfide; 100 tests for Iron.