This copper test kit tests for copper using the LRC Comparator. Range and sensitivity is 0, 0.05, 0.10, 0.15, 0.20, 0.30, 0.40, 0.50 ppm Cu.
This Sulfide Test kit tests for sulfide using the Octa-Slide 2 Comparator. Range and sensitivity is 0.2, 0.5, 1.0, 2.0, 5.0, 10.0, 15.0, 20.0 ppm S2-.
The electronic Salt TRACER PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F.
- Easy to use
- 2% accuracy for EC, TDS, and Salt modules
- Automatic temperature compensation
- Self calibration
- Memory can store up to 25 readings; autopower off after 10 minutes of no button presses
- Automatic shut-off and low battery indicator; uses four 3V CR-2032 button batteries
This kit tests for Wide Range pH using the Octa-Slide 2 Comparator. Range and sensitivity is 5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 9.0, 10.0 pH
This kit tests for Tannin/Lignin using the Octa-Slide 2 Comparator. Range and sensitivity is 1, 2, 3, 4, 5, 6, 8, 10 ppm Tannin or lignin like substances.
Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.
- Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
- Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
- Memory stores up to 25 labeled readings; auto power off and low battery indicator
- Adjustable Conductivity to TDS ratio
- Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
- Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
- Readings are not affected by sample color or turbidity
- Automatic self calibration
- Extra bold display includes an analog bar graph feature
- Memory can store up to 15 readings
- Chlorine and pH modes also display sample temperature
- Meter identifies which probe is in use and retains calibrations
- Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
- Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
- Follows EPA protocol for ISE methods
An 8″ resin column (10.25″ total height) that softens up to 70 gallons of medium hard water (7 gpg hardness) before requiring regeneration or fresh resin. Model S softener is furnished in the Model AT-38 and AT-Q-38 outfits.
The electronic pH TRACER PockeTester™ allows direct reading of pH from 0.01 to 14.00 pH. The TRACER offers simultaneous pH and Temperature displays and a 15-reading memory storage. pH range is 0.00 to 14.00 pH/0.01 pH. Temperature range is 23° to 194°F (5° to 90° C).
- Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
- Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
- Adjustable Salinity Compensation from 0 to 50 ppt
- Memory stores up to 25 data sets with DO and Temperature reading
- Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
- Optional 3 ft (1m) or 16 ft (5m) extension cable
- Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48″ (1.2m) neckstrap