These Potassium Chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.

Conductivity TDS Standard Size Options

Item Description Order Code
Conductivity TDS Standard, 6668 μS/cm 4668 ppm, 100mL 6418-J
Conductivity TDS Standard, 6668 μS/cm 4668 ppm, 500mL 6418-L

 

These Potassium Chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.

Conductivity TDS Standard Size Options

Item Description Order Code
Conductivity TDS Standard, 718 μS/cm 503 ppm, 100mL 6417-J
Conductivity TDS Standard, 718 μS/cm 503 ppm, 500mL 6417-L
Conductivity TDS Standard, 718 μS/cm 503 ppm, 3800mL 6417-N

 

The LaMotte Stormwater MS4 Kit has instrumentation and reagent systems to provide a preliminary screening of stormwater outflow, and to determine whether it is contributing to the overall pollutant load from precipitation events. Meets guidance as set forth by USEPA.

Features

 

The electronic pH TRACER PockeTester™ allows direct reading of pH from 0.01 to 14.00 pH. The TRACER offers simultaneous pH and Temperature displays and a 15-reading memory storage. pH range is 0.00 to 14.00 pH/0.01 pH. Temperature range is 23° to 194°F (5° to 90° C).

 

This kit tests for Calcium Hardness in fresh or salt water. Includes inhibitors to eliminate metal interference’s. All results are as CaCO3. Range/sensitivity is 0-200 ppm/4 ppm CaCO3, 0-2,500 ppm by dilution.

 

This kit tests for nitrite using the direct reading titrator method. Range/sensitivity is 0-1000 ppm/20 ppm NaNO2.

 

Insta-TEST® Chlorine Dioxide is a convenient way to test for Chlorine Dioxide levels in sanitized water. Range and sensitivity is 0, 10, 25, 50, 100, 250, 500 ppm.

 

This kit tests for Phosphonate using the drop count method. Range: 1 drop = 1.25 ppm HEDP, 1 drop = 1.4 ppm PBTC.

 

The Low Range Manganese test kit measures Manganese levels at 0.05, 0.1, 0.2, 0.4, 0.6, 0.8 and 1.0 ppm using the Octa-Slide 2 Comparator.

 

This kit tests for Total Hardness by using the Direct Reading Titrator Method. All results are as CaCO3. Range/sensitivity is 0-200 ppm/4ppm CaCO3.