This kit tests for pH using the Octa-Slide 2 Comparator ranging from 6.0 – 7.4 pH.

 

The Insta-TEST® Total Chlorine test strips are a convenient way to test water for Total Chlorine. Range and sensitivity is 0, 0.5, 1, 3, 5 ppm.

 

This kit tests for Sulfite using the Direct Reading Titrator method. Range and sensitivity is 0-100 ppm/2 ppm SO32-.

 

This Alkalinity Test Kit use titrations with standard acid to the phenolphthalein (P) and/or total (T) alkalinity endpoint. Range and sensitivity is 0-200 ppm/ 4 ppm as CaCO3.

 

This kit tests for Carbon Dioxide where a standard alkali is used to titrate samples to the phenolphthalein endpoint. Range/sensitivity is 0-50 ppm/1.0 ppm CO2.

 

This kit tests for pH using the Octa-Slide 2 Comparator ranging from 7.2 – 8.6 pH.

 

The Insta-TEST® Low Range Hardness test strips are a convenient way to test hardness levels in water for fast results. Range and sensitivity is 0, 30, 60, 120, 180 ppm.

 

This kit tests for Sulfite using the drop count method. Range and sensitivity is 1 drop = 5 ppm SO32-.

 

This kit tests for Alkalinity using the dropper bottle method. Range/sensitivity is 1 drop = 10, 25, or 50 ppm as CaCO3.

 

In this Caustic Test Kit a sample is reacted with barium to precipitate any carbonates, then is titrated with a standard acid to the phenolphthalein endpoint. Range/sensitivity is 0-10%/0.2% NaOH.