- Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
- Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
- Readings are not affected by sample color or turbidity
- Automatic self calibration
- Extra bold display includes an analog bar graph feature
- Memory can store up to 15 readings
- Chlorine and pH modes also display sample temperature
- Meter identifies which probe is in use and retains calibrations
- Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
- Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
- Follows EPA protocol for ISE methods
2951HR High Range QAC test papers are specifically formulated to read high range levels of QAC. Range and sensitivity is 200, 400, 600, 1000, 1500 ppm.
Minute amount of color permits immediate visual distinction of different buffer values.
Measure the Total Chlorine level from 0, 1, 5, 10, 20, 50 ppm, and pH from pH 4, 5, 6, 7, 8, 9, 10 in 15 seconds. These strips are packaged with 25 strips per bottle.
This Chlorine test kit measures for high ranges of Chlorine using Chlorine DPD tablets and the Octa-Slide 2 Comparator. Range/sensitivity is 1.0-10.0 ppm Cl.
This kit tests for nitrate or nitrite using the Octa-Slide 2 Comparator. Range/sensitivity is 0.25, 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10.0 ppm NO3-N.
- Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
- Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
- Adjustable Salinity Compensation from 0 to 50 ppt
- Memory stores up to 25 data sets with DO and Temperature reading
- Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
- Optional 3 ft (1m) or 16 ft (5m) extension cable
- Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48″ (1.2m) neckstrap
The Insta-TEST® Low Range Hydrogen Peroxide Test Strips is a convenient way to quickly measure peroxide levels in water with fast dip and read results. Range and sensitivity is 0, 1, 3, 10, 30, 50 ppm.
The following potassium chloride solutions can be used to standardize conductivity meters. TDS values are based on a 0.7 conversion from conductivity.
The electronic Salt TRACER PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F.
- Easy to use
- 2% accuracy for EC, TDS, and Salt modules
- Automatic temperature compensation
- Self calibration
- Memory can store up to 25 readings; autopower off after 10 minutes of no button presses
- Automatic shut-off and low battery indicator; uses four 3V CR-2032 button batteries