LaMotte Downloadable Instructions and Manuals
If you have misplaced your LaMotte product instruction or manual you can view and download a PDF document here from the Downloads tab below.
Note: The site contains instructions and manuals for both current products and archived instructions and manuals for discontinued products. For up-to-date safety information for all reagents, refer to the SDS using the Safety Data Sheet Search.
Quick, Accurate, Digital Measurement!
The world’s first pocket-sized ISE meter for measuring total chlorine. Use it to test ORP with interchangeable flat surface sensors.
- High resolution to 1 mV
- Automatic self calibration
The electronic Salt TRACER PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm. TDS is measured from 0 to 9,999 ppm and Temperature from 32.0° to 149°F.
- Easy to use
- 2% accuracy for EC, TDS, and Salt modules
- Automatic temperature compensation
- Self calibration
- Memory can store up to 25 readings; autopower off after 10 minutes of no button presses
- Automatic shut-off and low battery indicator; uses four 3V CR-2032 button batteries
Designed for the pool professional. The PockeTester™ measures the Sodium Chloride level in salt water pools with a range from 0 to 9,999 ppm; pH is measured 0.00 to 14.0 pH; TDS from 0 to 9999 ppm; and Temperature from 32.0° to 149°F. A memory feature saves up to 25 test results.
- Measures five parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
- Units of measure: pH, μS, mS, ppm, ppt, mg/L, g/L, °C, °F
- Memory stores up to 25 labeled readings; auto power off and low battery indicator
- Adjustable Conductivity to TDS ratio
The electronic pH TRACER PockeTester™ allows direct reading of pH from 0.01 to 14.00 pH. The TRACER offers simultaneous pH and Temperature displays and a 15-reading memory storage. pH range is 0.00 to 14.00 pH/0.01 pH. Temperature range is 23° to 194°F (5° to 90° C).
- Use the meter to test pH and ORP with interchangeable flat surface sensors. The most versatile PockeTester™ ever!
- Read Total Chlorine from 0.00-9.99 ppm to 0.01 ppm resolution
- Readings are not affected by sample color or turbidity
- Automatic self calibration
- Extra bold display includes an analog bar graph feature
- Memory can store up to 15 readings
- Chlorine and pH modes also display sample temperature
- Meter identifies which probe is in use and retains calibrations
- Automatic shut-off and Low Battery indicator; uses four LR-44 batteries
- Includes 100 reagent tablets at almost half the price of similar Chlorine ISE reagents
- Follows EPA protocol for ISE methods
- Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00 ppm (mg/L)
- Adjustable Altitude Compensation (0-20,000 ft in 1,000 ft increments)
- Adjustable Salinity Compensation from 0 to 50 ppt
- Memory stores up to 25 data sets with DO and Temperature reading
- Self-calibration on power up; Data Hold, Auto power off, Low battery indicator
- Optional 3 ft (1m) or 16 ft (5m) extension cable
- Complete with DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 1.5V SR44W batteries, and 48″ (1.2m) neckstrap